Dinstar FXO Gateway Configuration | DCNET INDIA

[krsourabh]

Dinstar FXO Gateway Configuration Guide
Step 1: Access the Web Interface
Connect the Dinstar fxo-gateway your network.
Find the device’s IP address (default is usually 192.168.11.1).
Open a browser and enter the IP address.
Login using the default credentials (admin/admin).

Step 2: Network Configuration
Navigate to Network > WAN Settings.
Set a static IP or enable DHCP.
Save and reboot if changes are made.

Step 3: SIP Server Configuration
Go to VoIP > SIP Settings.
Add your SIP server details:
SIP Server IP/Domain
SIP Port (default: 5060)
Authentication Username & Password
Save and apply settings.

Step 4: FXO Port Configuration
Navigate to FXO Settings > Port Settings.
Set each FXO port to:
Call Mode: VoIP
Caller ID Detection: Enabled
DTMF Mode: RFC2833/Inband/SIP INFO
Save and apply.

Step 5: Dial Plan & Routing
Configure Dial Rules under Call Routing.
Set up inbound and outbound call rules.
Map FXO ports to SIP extensions or external numbers.


Step 6: Save & Reboot
Apply all changes and restart the gateway.
Test inbound and outbound calls.
For advanced settings like call forwarding, PSTN fallback, or SIP trunking, refer to the Dinstar user manual or contact your service provider. 🚀

Conclusion:

DCNET India is a trusted provider of networking and dinstar VoIP solutions, offering high-quality products like dinstar fxo-gateway
 With expert support and tailored solutions, DCNET ensures seamless integration of VoIP technology for businesses. Whether for small enterprises or large organizations, DCNET delivers reliable and efficient communication systems across India.