ROI Measure > Display Label Bug

[roberto aranibar]

Dear Wayne,

You may have not received the following message since I sent it directly to
you instead of through the mailing list...

You fixed a bug for ImageJ v1.37e which caused a ROI to lose its label name
after it was modified with the shift or alt keys. It seems however that
there is still a problem with ROIs keeping their label names after the ROI
Manager and a saved ROI set are reopened. This only occurs with ROIs that
have been modified using the shift key.

The problem can be observed as follows:

1. Create an ROI
2. Modify it using the shift key
3. Add the ROI to the ROI Manager
4. Measure the ROI; the label is displayed properly
5. Save the ROI
6. Close the ROI Manager
7. Open the ROI Manager
8. Open the ROI that was saved
9. Measure the ROI; the label only shows the filename and not the name of
the ROI

I would greatly appreciate it if you could fix this bug. Hopefully it is an
easy fix. Thank you Wayne.

Roberto Aranibar

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

[Commandeur]

Hi,

I've followed step 1 to 9 to see if I get the same bug but
for me it works fine. The label it displays is

filename: regionname

I'm using ImageJ v1.37g on a Windows XP pc.

Have you updated ImageJ to version 1.37g yet? Or maybe you
have a different OS.

Greetings,
Edwin


> Dear Wayne,
>
> You may have not received the following message since I
sent it directly to
> you instead of through the mailing list...
>
> You fixed a bug for ImageJ v1.37e which caused a ROI to
lose its label name
> after it was modified with the shift or alt keys. It seems
however that
> there is still a problem with ROIs keeping their label
names after the ROI
> Manager and a saved ROI set are reopened. This only occurs
with ROIs that

> have been modified using the shift key.
>
> The problem can be observed as follows:
>
> 1. Create an ROI
> 2. Modify it using the shift key
> 3. Add the ROI to the ROI Manager
> 4. Measure the ROI; the label is displayed properly
> 5. Save the ROI
> 6. Close the ROI Manager
> 7. Open the ROI Manager
> 8. Open the ROI that was saved
> 9. Measure the ROI; the label only shows the filename and

not the name of
> the ROI
>
> I would greatly appreciate it if you could fix this bug.
Hopefully it is an
> easy fix. Thank you Wayne.
>
> Roberto Aranibar
>
>
_________________________________________________________________
> Express yourself instantly with MSN Messenger! Download
today - it's FREE!
>
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>

[roberto aranibar]

hmm.. yes, I do have 1.37g, and I'm running it on Windows XP. Perhaps the
problem is in something more specific that I'm doing. I can reproduce the
error every time, even on different computers.

If it makes any difference, I'm using the freehand selection tool, tracing
an ROI, using the shift key to trace and add another region to the ROI, and
adding it to the ROI manager with the "3" shortcut for "Add and Draw". I
then save the ROI, close the ROI manager, revert the file, open the ROI, and
measure it. I have my measurements set to measure only area and to display
the label. I get only the filename in the label column of the results
window.

If you don't get the error, I'm confused.

Thanks for your help,

Roberto

>From: Commandeur <[hidden email]>
>Reply-To: ImageJ Interest Group <[hidden email]>
>To: [hidden email]
>Subject: Re: ROI Measure > Display Label Bug
>Date: Wed, 24 May 2006 07:09:40 GMT
>
>Hi,
>
>I've followed step 1 to 9 to see if I get the same bug but
>for me it works fine. The label it displays is
>
>filename: regionname
>
>I'm using ImageJ v1.37g on a Windows XP pc.
>
>Have you updated ImageJ to version 1.37g yet? Or maybe you
>have a different OS.
>
>Greetings,
>Edwin
>
>
> > Dear Wayne,
> >
> > You may have not received the following message since I
>sent it directly to
> > you instead of through the mailing list...
> >
> > You fixed a bug for ImageJ v1.37e which caused a ROI to
>lose its label name
> > after it was modified with the shift or alt keys. It seems
>however that
> > there is still a problem with ROIs keeping their label
>names after the ROI
> > Manager and a saved ROI set are reopened. This only occurs
>with ROIs that
> > have been modified using the shift key.
> >
> > The problem can be observed as follows:
> >
> > 1. Create an ROI
> > 2. Modify it using the shift key
> > 3. Add the ROI to the ROI Manager
> > 4. Measure the ROI; the label is displayed properly
> > 5. Save the ROI
> > 6. Close the ROI Manager
> > 7. Open the ROI Manager
> > 8. Open the ROI that was saved
> > 9. Measure the ROI; the label only shows the filename and
>not the name of
> > the ROI
> >
> > I would greatly appreciate it if you could fix this bug.
>Hopefully it is an
> > easy fix. Thank you Wayne.
> >
> > Roberto Aranibar
> >
> >
>_________________________________________________________________
> > Express yourself instantly with MSN Messenger! Download
>today - it's FREE!
> >
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> >

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

[Commandeur]

Hi,

You are right, I'm getting the same error. I misinterpreted
one of your steps. I tried different selection tools and
"Add" versus "Add and draw" (in my version "3" isn't the
shortcut for Add and Draw), but the result was the same.

Greetings,
Edwin

> hmm.. yes, I do have 1.37g, and I'm running it on Windows
XP. Perhaps the
> problem is in something more specific that I'm doing. I
can reproduce the
> error every time, even on different computers.
>
> If it makes any difference, I'm using the freehand
selection tool, tracing
> an ROI, using the shift key to trace and add another
region to the ROI, and
> adding it to the ROI manager with the "3" shortcut for
"Add and Draw". I
> then save the ROI, close the ROI manager, revert the file,
open the ROI, and
> measure it. I have my measurements set to measure only
area and to display
> the label. I get only the filename in the label column of
the results

> window.
>
> If you don't get the error, I'm confused.
>
> Thanks for your help,
>
> Roberto
>
>
> >From: Commandeur <[hidden email]>
> >Reply-To: ImageJ Interest Group <[hidden email]>
> >To: [hidden email]
> >Subject: Re: ROI Measure > Display Label Bug
> >Date: Wed, 24 May 2006 07:09:40 GMT
> >
> >Hi,
> >
> >I've followed step 1 to 9 to see if I get the same bug but
> >for me it works fine. The label it displays is
> >
> >filename: regionname
> >
> >I'm using ImageJ v1.37g on a Windows XP pc.
> >
> >Have you updated ImageJ to version 1.37g yet? Or maybe you
> >have a different OS.
> >
> >Greetings,
> >Edwin
> >
> >
> > > Dear Wayne,
> > >
> > > You may have not received the following message since I
> >sent it directly to
> > > you instead of through the mailing list...
> > >
> > > You fixed a bug for ImageJ v1.37e which caused a ROI to
> >lose its label name
> > > after it was modified with the shift or alt keys. It seems
> >however that
> > > there is still a problem with ROIs keeping their label
> >names after the ROI
> > > Manager and a saved ROI set are reopened. This only occurs
> >with ROIs that
> > > have been modified using the shift key.
> > >
> > > The problem can be observed as follows:
> > >
> > > 1. Create an ROI
> > > 2. Modify it using the shift key
> > > 3. Add the ROI to the ROI Manager
> > > 4. Measure the ROI; the label is displayed properly
> > > 5. Save the ROI
> > > 6. Close the ROI Manager
> > > 7. Open the ROI Manager
> > > 8. Open the ROI that was saved
> > > 9. Measure the ROI; the label only shows the filename and
> >not the name of
> > > the ROI
> > >
> > > I would greatly appreciate it if you could fix this bug.
> >Hopefully it is an
> > > easy fix. Thank you Wayne.
> > >
> > > Roberto Aranibar
> > >
> > >
>
>_________________________________________________________________
> > > Express yourself instantly with MSN Messenger! Download
> >today - it's FREE!
> > >
>
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> > >
>
>

_________________________________________________________________
> Express yourself instantly with MSN Messenger! Download
today - it's FREE!
>
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>

[Wayne Rasband]

This bug is fixed in ImageJ 1.37h, due next week.

-wayne

On May 24, 2006, at 12:52 AM, roberto aranibar wrote:

> Dear Wayne,
>
> You may have not received the following message since I sent it
> directly to you instead of through the mailing list...
>
> You fixed a bug for ImageJ v1.37e which caused a ROI to lose its label
> name after it was modified with the shift or alt keys. It seems
> however that there is still a problem with ROIs keeping their label
> names after the ROI Manager and a saved ROI set are reopened. This
> only occurs with ROIs that have been modified using the shift key.
>
> The problem can be observed as follows:
>
> 1. Create an ROI
> 2. Modify it using the shift key
> 3. Add the ROI to the ROI Manager
> 4. Measure the ROI; the label is displayed properly
> 5. Save the ROI
> 6. Close the ROI Manager
> 7. Open the ROI Manager
> 8. Open the ROI that was saved
> 9. Measure the ROI; the label only shows the filename and not the name
> of the ROI
>
> I would greatly appreciate it if you could fix this bug. Hopefully it
> is an easy fix. Thank you Wayne.
>
> Roberto Aranibar
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today - it's
> FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>