Scion firewire camera with Windows 7

[Martin Wessendorf-2]

Dear list--

I have a Scion 1394 firewire camera that worked perfectly under Windows
XP.  Because of some problems automating back-up in XP, I decided to
upgrade to Windows 7 (32-bit).  Based on available info, it looked
possible but would require using the firewire drivers from Windows
Vista.  (See http://micro-manager.org/wiki/ScionCam and
http://valelab.ucsf.edu/~nstuurman/Scion/Drivers/technical_note_2.htm )

I downgraded the firewire drivers to “1394 OHCI Compliant Host
controller (Legacy)” but the camera (...which indeed is plugged in to
the computer and the power light is on) doesn't show up in the device
manager.  Neither does it show up using the "normal" firewire driver.
Upgrading the camera drivers becomes both moot and impossible.

Any suggestions??  I'd check with the vendor but they're out of business.

Thanks!

Martin Wessendorf
--
Martin Wessendorf, Ph.D.                   office: [phone]
Assoc Prof, Dept Neuroscience                 lab: [phone]
University of Minnesota             Preferred FAX: [phone]
6-145 Jackson Hall, 321 Church St. SE    Dept Fax: [phone]
Minneapolis, MN  55455                    e-mail: [hidden email]

--
ImageJ mailing list: http://imagej.nih.gov/ij/list.html

[Henrik Kaker]

Hello,

Try at Web archive, http://web.archive.org/web/*/http://www.scioncorp.com.

Regards,

Henrik

On 10/29/2013 9:24 PM, Martin Wessendorf wrote:

> Dear list--
>
> I have a Scion 1394 firewire camera that worked perfectly under
> Windows XP.  Because of some problems automating back-up in XP, I
> decided to upgrade to Windows 7 (32-bit).  Based on available info, it
> looked possible but would require using the firewire drivers from
> Windows Vista.  (See http://micro-manager.org/wiki/ScionCam and
> http://valelab.ucsf.edu/~nstuurman/Scion/Drivers/technical_note_2.htm )
>
> I downgraded the firewire drivers to “1394 OHCI Compliant Host
> controller (Legacy)” but the camera (...which indeed is plugged in to
> the computer and the power light is on) doesn't show up in the device
> manager.  Neither does it show up using the "normal" firewire driver.
> Upgrading the camera drivers becomes both moot and impossible.
>
> Any suggestions??  I'd check with the vendor but they're out of business.
>
> Thanks!
>
> Martin Wessendorf

--
Dr. Henrik Kaker
Ob Suhi 23
SI-2390 Ravne
Slovenia
GSM: [phone]
http://www.kaker.com
Email:[hidden email]

--
ImageJ mailing list: http://imagej.nih.gov/ij/list.html