Posted by
Kyaw Moe on
Oct 06, 2015; 6:49am
URL: http://imagej.273.s1.nabble.com/requesting-the-instruction-for-imageJ-tp5014435p5014554.html
Dear Professor
I can apply 3D object counter. First I change my image to
black and white binary image by CTAn software. Then I open this dataset by
Fiji and then, I use skeletonized plugin to find center axis. Then, I check
the center axis by 3D viewer plugin. FInally, I use 3D objective counter
plugin to calculate the value for Z axis, the vertical axis. For example, I
got value as X is 35.610, Y is 49.505 and Z is 122.015. I want to express
these value in micrometer. Could I change? How can I change? Please guide
me as necessary.
Sincerely
KM
On Mon, Sep 28, 2015 at 8:45 PM, Kyaw Moe <
[hidden email]> wrote:
> Thank Professor. I will try.
>
>
> Sincerely
> KM
>
> On Mon, Sep 28, 2015 at 4:26 PM, s c Narula <
[hidden email]> wrote:
>
>> Try 3 D object counter Diameter J
>>
>> Prof S C Narula
>>
>> On Fri, Sep 25, 2015 at 6:08 PM, Kyaw Moe <
[hidden email]> wrote:
>>
>> > [image: Boxbe] <
https://www.boxbe.com/overview> This message is
>> eligible
>> > for Automatic Cleanup! (
[hidden email]) Add cleanup rule
>> > <
>>
https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Ftoken%3D2NCxLA5bPgHNClKUvXEHRRtX6Pf9F%252FDYP6lo%252FlVCUjvDTANwibmZivWWbbmrruA53b2XoBFZxSyl%252BjTWJDsmPRUKrQJPrmlBN0YtxOXO65d3MnU7WZ%252Fy%252Bx9MTt7gsgJYYXvNz3JKhqg%253D%26key%3DbaB38LdLyU09KSiDA2ZVowjHAsuhqGakGKhf1bmqs2A%253D&tc_serial=22761807921&tc_rand=1253361990&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>> >
>> > | More info
>> > <
>>
http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=22761807921&tc_rand=1253361990&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>> >
>> >
>> > Thank Professor.
>> > I will try.
>> >
>> > Sincerely
>> > KM
>> >
>> > On Fri, Sep 25, 2015 at 2:47 AM, s c Narula <
[hidden email]> wrote:
>> >
>> > > try thershold and then analyze
>> > >
>> > >
>> > > Professor Narula
>> > >
>> > > On Thu, Sep 24, 2015 at 2:09 PM, Kyaw Moe <
[hidden email]>
>> wrote:
>> > >
>> > > > [image: Boxbe] <
https://www.boxbe.com/overview> This message is
>> > eligible
>> > > > for Automatic Cleanup! (
[hidden email]) Add cleanup rule
>> > > > <
>> > >
>> >
>>
https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Ftoken%3DXUn1LXOLGHTafPVAumBxWMNvebtFTJRqx0Q%252BIvY7GORP066J3orEktUgvS0l%252FxiwjQ1GC57kiwoDnJXDpcmWUh9pWCJWUPHwhJihTdPRs1YYbgsRco%252FLwxXU4AP54OOFlzc3rWpvKJ8%253D%26key%3DqzI6EPhJC7Cao1kmwFT3c%252Ff5z1aNAOnmPoz63IvzlZA%253D&tc_serial=22747326400&tc_rand=136602945&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>> > > >
>> > > > | More info
>> > > > <
>> > >
>> >
>>
http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=22747326400&tc_rand=136602945&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>> > > >
>> > > >
>> > > > Dear all
>> > > > I want to find the center of gravity of an irregular
>> > tube.
>> > > I
>> > > > used the plugin Skeletonize3D and AnalyseSkeleton, but I cannot find
>> > the
>> > > > value in millimeter or micrometer for Center of Gravity of that
>> tube.
>> > > Could
>> > > > you help me, please?
>> > > >
>> > > > Best Regards
>> > > > Kyaw Moe
>> > > >
>> > > > --
>> > > > ImageJ mailing list:
http://imagej.nih.gov/ij/list.html>> > > >
>> > > >
>> > >
>> > > --
>> > > ImageJ mailing list:
http://imagej.nih.gov/ij/list.html>> > >
>> >
>> > --
>> > ImageJ mailing list:
http://imagej.nih.gov/ij/list.html>> >
>> >
>>
>> --
>> ImageJ mailing list:
http://imagej.nih.gov/ij/list.html>>
>
>
--
ImageJ mailing list:
http://imagej.nih.gov/ij/list.html